Regviz

NXP Semiconductors /MIMXRT1021 /PMU /REG_1P1_SET

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as REG_1P1_SET

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/NXP Semiconductors/MIMXRT1021/PMU/REG_1P1_SET#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (ENABLE_LINREG)ENABLE_LINREG 0 (ENABLE_BO)ENABLE_BO 0 (ENABLE_ILIMIT)ENABLE_ILIMIT 0 (ENABLE_PULLDOWN)ENABLE_PULLDOWN 0BO_OFFSET 0OUTPUT_TRG0 (BO_VDD1P1)BO_VDD1P1 0 (OK_VDD1P1)OK_VDD1P1 0 (ENABLE_WEAK_LINREG)ENABLE_WEAK_LINREG 0 (SELREF_WEAK_LINREG_0)SELREF_WEAK_LINREG

SELREF_WEAK_LINREG=SELREF_WEAK_LINREG_0

Description

Regulator 1P1 Register

Fields

ENABLE_LINREG

Control bit to enable the regulator output.
ENABLE_BO

Control bit to enable the brownout circuitry in the regulator.
ENABLE_ILIMIT

Control bit to enable the current-limit circuitry in the regulator.
ENABLE_PULLDOWN

Control bit to enable the pull-down circuitry in the regulator
BO_OFFSET

Control bits to adjust the regulator brownout offset voltage in 25mV steps
OUTPUT_TRG

Control bits to adjust the regulator output voltage

4 (OUTPUT_TRG_4): 0.8V

16 (OUTPUT_TRG_16): 1.1V
BO_VDD1P1

Status bit that signals when a brownout is detected on the regulator output.
OK_VDD1P1

Status bit that signals when the regulator output is ok. 1 = regulator output > brownout target
ENABLE_WEAK_LINREG

Enables the weak 1p1 regulator
SELREF_WEAK_LINREG

Selects the source for the reference voltage of the weak 1p1 regulator.

0 (SELREF_WEAK_LINREG_0): Weak-linreg output tracks low-power-bandgap voltage

1 (SELREF_WEAK_LINREG_1): Weak-linreg output tracks VDD_SOC_IN voltage

Links

()

Register License

Copyright 2016-2020 NXP All rights reserved.

SPDX-License-Identifier: BSD-3-Clause

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data